Standard breakout board rev 3.3.B
Through-hole: you build it. The converters, amplifier and clock plug in as modules.
More infoBuy now · Coming soon
Maintenance, Operations, and Service System
M.O.S.S.
A digital dash for classic skid steers. Gauges you can read at a glance, warnings you can't miss, and a maintenance schedule that keeps itself.
Made for
M.O.S.S. was developed on our own 1978 Bobcat M700, and it's made for the whole family of classic Bobcat skid-steer loaders below. They all work the same way: they differ mainly in engine speed, hydraulic drive pressure, overall size and operator comfort.
- 700
- 721
- 722
- 741
- 742
- 743
Independent and unofficial. M.O.S.S. and Project Moon Pi are not affiliated with, sponsored by or endorsed
by Bobcat Company or Doosan Bobcat North America, Inc., and M.O.S.S. was not developed in cooperation with them.
Bobcat and the model names above are trademarks of Doosan Bobcat North America, Inc., used here only to say which
machines M.O.S.S. is designed to fit. M.O.S.S. is an add-on: always follow the machine maker's manuals and
safety instructions.
Watch
M.O.S.S. in 60 seconds: the dash, its warnings, the service records and the management website.
On the dash
The gauges: engine speed, battery, fuel, machine angle and every warning light
What it does
- Clear gaugesEngine speed, battery and charging, fuel, oil pressure, hydraulic filter and temperature, and machine angle.
- An hour meter that never loses timeThe dash stays on for a moment after key-off to save everything and shut down cleanly.
- Maintenance that keeps itselfEvery service item counts down by engine hours, with intervals that change with your climate.
- Warnings, never surprisesBright alarms and a horn for anything wrong. M.O.S.S. only warns: it never stops your engine.
- HistoryRunning time, engine-speed bands and every alarm, saved by day.
- Service from your phoneA service Wi-Fi and web page for settings, reports and updates, protected by a maintenance code.
- Safe updatesUpdates come from a laptop or a USB stick, and only signed updates will install.
- Built to be fixedA Raspberry Pi, standard parts, a printed guide, and a board with a test point and light for every signal.
The boards
M.O.S.S. connects to the machine through one breakout board, with small daughter boards for the extras you want. All of them are planned for sale. None are on sale yet.
Breakout boards choose one
S.M.B.B. rev 1.0
Surface-mount, made complete by the board maker. Head temperatures, angle sensor and clock are on the board.
More infoBuy now · Coming soon
S.M.B.B.-H rev 1.0
The S.M.B.B. with through-hole parts: the board maker fits the chips, you solder the rest.
More infoBuy now · Coming soon
Daughter boards add only what you need
CHT + Parking Brake rev 1.3
Four cylinder-head temperatures and the parking brake switch. For the Standard board.
More infoBuy now · Coming soon
Pi 4 TILT + CLOCK rev 2.0
The clock and angle sensor for a Pi 4, in chip, module and battery-plug versions. For the Standard board.
More infoBuy now · Coming soon
GPS rev 1.0
Ground speed, altitude, job sites, and where alarms happened. Works with any breakout board.
More infoBuy now · Coming soon
ADS1115 adapter rev 1.3
Fits the 10-pin ADS1115 converter module in place of the two-row one. For the Standard board.
More infoBuy now · Coming soon
M.O.S.S. is in development and bench testing. It hasn't been field-tested yet, and details may change before release.
Launch alert
M.O.S.S. and its boards aren't on sale yet. Leave your email and we'll send one message when they are.
No spam. Unsubscribe with one click. Questions? Email us.